The post 5-Way Seconday Air Regulator – Polycarbonate Bonnet appeared first on Personal Pub JAX.
]]>
You don’t need five separate air regulators to dispense beer in your multi-keg setup. Instead just invest in the dependable efficiency of this five-gauge secondary CO2 regulator! Each of the five gauges of this secondary gas regulator is capable of flawless pressure regulation of one individual keg in your draft dispensing system. This makes it easy to ensure that all of your kegs are properly calibrated without attaching a separate primary regulator to each barrel of beer. For total control, you can even utilize the shut off valve on each gauge and cut the pressure off completely if needed. The polycarbonate bonnet of this secondary regulator is much stronger and more lightweight than a traditional zinc bonnet and it also better stands up to the corrosive possibilities of operation in a wet environment. And for ultimate convenience, the adjustment of each gauge is completely tool-free. Just pull the cap knob, twist to the desired pressure, push it back into place, and enjoy the hassle-free dispensing! If you want to save time, money, and energy with regards to setting up your multi-keg draft dispensing system, you need this 5-Way Secondary Air Regulator with Polycarbonate Bonnet! In stock and ready to ship. Features: Bonnet material is glass-filled polycarbonate. 0-60 PSI keg pressure gauge. 0-2000 PSI tank pressure gauge. Air shut off switch for each CO2 line. High CO2 volumetric flow to insure continuity in product dispensing. 10 Micron filter built in to keep contaminants out of regulator. Less prone to freeze up problems. Gray bonnet. Approved by Pepsi and Coca-Cola. Specs: Dimensions: 18 1/2″L x 6 1/2″H x 3 1/4″D.The post 5-Way Seconday Air Regulator – Polycarbonate Bonnet appeared first on Personal Pub JAX.
]]>The post Flow Rite Regulator for Jockey Box – No gauges – 30-45 PSIG appeared first on Personal Pub JAX.
]]>
This Flow Rite CO2 regulator is the perfect solution for hassle-free dispensing from your jockey box. Simply adjust the knob between 30-45 PSI until you’re happy with the flow rate of your beer. Gauge-free operation makes this a simple, sturdy solution for portable beer dispensing at parties, picnics, or anywhere else! In stock and ready to ship. Features: Air shut off switch for CO2 line. No gauges to break. Easy to set-up and use. . Specs: Regulator Dimensions: 3 1/2″W x 4 1/4″H x 3 1/2″D. CO2 tank mount CGA-320 threads. 3/8″ outside diameter outlet barb fits 5/16″ inside diameter hose. 30-45 PSI output pressure.The post Flow Rite Regulator for Jockey Box – No gauges – 30-45 PSIG appeared first on Personal Pub JAX.
]]>The post Dual Gauge Nitrogen Regulator Fits CGA 580 Valve Great for Beer Mix! appeared first on Personal Pub JAX.
]]>
Dual Gauge High Performance Regulator for Nitrogen tanks. Great for straight Nitrogen or Beer MixThe post Dual Gauge Nitrogen Regulator Fits CGA 580 Valve Great for Beer Mix! appeared first on Personal Pub JAX.
]]>The post Taprite T752HP Two Product Dual Pressure Kegerator Co2 Regulator appeared first on Personal Pub JAX.
]]>
Tap two kegs at the same time and control the pressure to each of them individually! This Two Product Two Pressure CO2 Regulator has two separate gauges to uniquely measure the pressure to each keg and allow you to adjust it particularly for the type of beer or beverage you are drinking. A third gauge tells you the amount of CO2 left in your tank. Regulator attaches directly to CO2 tank and has an air shut off switch for each CO2 line. Nonadjustable “shut down” blows off at 55-65 PSI. The polycarbonate bonnet is lighter weight and stronger than zinc bonnet regulators and it will not corrode in wet environments. No special tools are required to raise or lower the CO2 pressure. The cap knob simply pulls out so it can be turned to adjust pressure up or down then pushes back in to lock in pressure. In stock and ready to ship. Features: Tap two kegs at the same time and control the pressure to each. 0-60 gauges measure pressure to each keg. 0-2000 gauge measures CO2 in tank. Has air shut off switch for each CO2 line. High CO2 volumetric flow to insure continuity in product dispensing. Bonnet material is glass-filled Polycarbonate. 10 Micron filter built in to keep contaminants out of regulator. Less prone to freeze up problems. Approved by Pepsi and Coca-Cola. Specs: Dimensions: 9″W x 7 1/2″H x 5 1/2″D.The post Taprite T752HP Two Product Dual Pressure Kegerator Co2 Regulator appeared first on Personal Pub JAX.
]]>The post Taprite Bronco Keg Pump appeared first on Personal Pub JAX.
]]>
A portable party pump system for single valve kegs. This convenient pump system is compact in size and comes complete with a sturdy metal tapping base, high volume air pump, beer tubing and faucet.The post Taprite Bronco Keg Pump appeared first on Personal Pub JAX.
]]>