5-Way Seconday Air Regulator – Polycarbonate Bonnet

Description

You don’t need five separate air regulators to dispense beer in your multi-keg setup. Instead just invest in the dependable efficiency of this five-gauge secondary CO2 regulator! Each of the five gauges of this secondary gas regulator is capable of flawless pressure regulation of one individual keg in your draft dispensing system. This makes it easy to ensure that all of your kegs are properly calibrated without attaching a separate primary regulator to each barrel of beer. For total control, you can even utilize the shut off valve on each gauge and cut the pressure off completely if needed. The polycarbonate bonnet of this secondary regulator is much stronger and more lightweight than a traditional zinc bonnet and it also better stands up to the corrosive possibilities of operation in a wet environment. And for ultimate convenience, the adjustment of each gauge is completely tool-free. Just pull the cap knob, twist to the desired pressure, push it back into place, and enjoy the hassle-free dispensing! If you want to save time, money, and energy with regards to setting up your multi-keg draft dispensing system, you need this 5-Way Secondary Air Regulator with Polycarbonate Bonnet! In stock and ready to ship. Features: Bonnet material is glass-filled polycarbonate. 0-60 PSI keg pressure gauge. 0-2000 PSI tank pressure gauge. Air shut off switch for each CO2 line. High CO2 volumetric flow to insure continuity in product dispensing. 10 Micron filter built in to keep contaminants out of regulator. Less prone to freeze up problems. Gray bonnet. Approved by Pepsi and Coca-Cola. Specs: Dimensions: 18 1/2″L x 6 1/2″H x 3 1/4″D.
Bonnet material is glass-filled polycarbonate.
0-60 PSI keg pressure gauge.
Has air shut off switch for CO2 line.
High CO2 volumetric flow to insure continuity in product dispensing.
Approved by Pepsi and Coca-Cola.
[amz_corss_sell asin=”B00AAFFVOA”]